GDF800-65 Spindle motor 0.8kw Air Cooled

Size: 65x181.5mm ( Body diameter:65mm;Length:181.5mm)
Speed Ways: Through 3-phase output inverter and adjust the inverter frequency to change the spindle speed.
Cooling: Air cooling
Power Interface: The air plug marked "1 ","2"," 3"," 4",
"1 ","2 ","3" were connected to inverter (U, V, W), 4 connected inverter ground.
(Pay attention! our spindle "4" connecting to GND,promised personal safety!!)

Power: 0.8kw
Voltage: 220vAC
Current: 3A
Frequency: 0-400Hz
Speed: 0-24000rpm
Runout Off: 0.01mm (High accuracy)
Bearing Type: 2X7002C P4 DT and 2X7000C P4 DT
Fully sealed angular contact bearings
Collet: ER11
Clip Knifediameter: 7mm,6.35mm,6mm,5mm,4mm,3.175mm,3mm,2mm,1mm
Air Cooling ER11 collet chunk
Grease Lubrication

Main Application:
Engrave for wood,bamboo,normal PCB,PVC,PMMA,plastic,duotone board(ABS)and etc nonmetal,
also can engrave on gold,silver,copper, aluminium,Pb etc
soft metal surface working.(Please pay more attention, this is wood working spindle, only can used for wood working and aluminum working,
please don't use it for steel. If you need steel working,please check the metal spindle,thank you!)